Differences

This shows you the differences between two versions of the page.

--- bluetooth:keychron [2020/10/25 04:37] – created ltsover9000
+++ bluetooth:keychron [2023/01/17 00:38] (current) – 192.168.1.159
@@ Line 4: / Line 4: @@
 Run
 ```
+rfcomm connect hci0 DC:2C:26:E3:E2:60
+#with the settings open
+```
+A PIN number should pop up
+Type that pin on the keyboard and press enter (keychron)
+Then it will say it
+```
+rfcomm connect hci0 DC:2C:26:E3:E2:60
+```
+Then, connect to the keychron k8 in the settings and BAM! works...
+Function Keys
+```
+/sys/module/hid_apple/parameters/fnmode
+```
+set the contents to
+```
+```
+for more information go to https://www.facebook.com/groups/Keychronlinux and search for "fnmode"
+or
+https://www.facebook.com/groups/454178115310062/search/?q=fnmode
+----------------------------
+You can set this persistently by creating a module options file like /etc/modprobe.d/hid_apple.conf:
+options hid_apple fnmode=0
+Reference: https://wiki.debian.org/InstallingDebianOn/Apple/PageFragmentKeyboard
+-------------------------------LATEST-------------------------------
+```
+I wanted media keys by default (I use them more), but wanted FN keys to still work (by pressing FN first).
+This is what I did:
+Hold FN + X + L for 4 seconds to change function mode (it flips between the two?).
+echo 0 | sudo tee /sys/module/hid_apple/parameters/fnmode
+echo "options hid_apple fnmode=0" | sudo tee -a /etc/modprobe.d/hid_apple.conf
+(Ubuntu) sudo update-initramfs -u
+Credit: https://mikeshade.com/posts/keychron-linux-function-keys/
 ```

ltsOver9000

User Tools

Site Tools

Differences

Page Tools