Cant connect to Keychron K8? is it asking for a pin?


Run 
```
rfcomm connect hci0 DC:2C:26:E3:E2:60
#with the settings open
```
A PIN number should pop up 

Type that pin on the keyboard and press enter (keychron) 



Then it will say it 
```
rfcomm connect hci0 DC:2C:26:E3:E2:60
```

Then, connect to the keychron k8 in the settings and BAM! works... 




Function Keys

```
/sys/module/hid_apple/parameters/fnmode
```
set the contents to 
```
2
```


for more information go to https://www.facebook.com/groups/Keychronlinux and search for "fnmode"

or

https://www.facebook.com/groups/454178115310062/search/?q=fnmode



----------------------------



You can set this persistently by creating a module options file like /etc/modprobe.d/hid_apple.conf:

options hid_apple fnmode=0
Reference: https://wiki.debian.org/InstallingDebianOn/Apple/PageFragmentKeyboard




-------------------------------LATEST-------------------------------

```
I wanted media keys by default (I use them more), but wanted FN keys to still work (by pressing FN first).

This is what I did:

Hold FN + X + L for 4 seconds to change function mode (it flips between the two?).

echo 0 | sudo tee /sys/module/hid_apple/parameters/fnmode

echo "options hid_apple fnmode=0" | sudo tee -a /etc/modprobe.d/hid_apple.conf

(Ubuntu) sudo update-initramfs -u

Credit: https://mikeshade.com/posts/keychron-linux-function-keys/
```