bluetooth:keychron

Cant connect to Keychron K8? is it asking for a pin?

Run ``` rfcomm connect hci0 DC:2C:26:E3:E2:60 #with the settings open ``` A PIN number should pop up

Type that pin on the keyboard and press enter (keychron)

Then it will say it ``` rfcomm connect hci0 DC:2C:26:E3:E2:60 ```

Then, connect to the keychron k8 in the settings and BAM! works…

Function Keys

``` /sys/module/hid_apple/parameters/fnmode ``` set the contents to ``` 2 ```

for more information go to https://www.facebook.com/groups/Keychronlinux and search for “fnmode”

You can set this persistently by creating a module options file like /etc/modprobe.d/hid_apple.conf:

——————————-LATEST——————————-

``` I wanted media keys by default (I use them more), but wanted FN keys to still work (by pressing FN first).

This is what I did:

Hold FN + X + L for 4 seconds to change function mode (it flips between the two?).

echo 0 | sudo tee /sys/module/hid_apple/parameters/fnmode

echo “options hid_apple fnmode=0” | sudo tee -a /etc/modprobe.d/hid_apple.conf

(Ubuntu) sudo update-initramfs -u